Print Page | Close Window

Hello from a new member

Printed From: BMPT Forum
Category: General Discussion
Forum Name: Modelling
Forum Description: Discussion about Modelling
URL: http://www.bmpt.co.uk/forum_posts.asp?TID=243
Printed Date: 26 March 2026 at 4:07pm


Topic: Hello from a new member
Posted By: Adzam
Subject: Hello from a new member
Date Posted: 18 November 2006 at 10:05pm

i`ve been  a member for a couple of months now but never posted,I`m a keen modeller with aprox 3 builds and a few refits under my belt,

as a new turn i`ve decided to build MTB 385 in 1/24 th scale, so please bare with me as i may be looking for more info other than the three sets of plans and one of john lamberts books.

 wont be much building being done just now as the good old scottish weather makes working in the garage  almost unbearable.however i`ll post pics as i go along.

 

cheers guys

 

Chris


Replies:
Posted By: Christian
Date Posted: 19 November 2006 at 7:45pm

Hi Adzam

Is it the Deans Marine kit? If so beware the angle of the foredeck gun is wrong on the plan, and the hull needs some mods (when it is splayed out to the correct width the freeboard is reduced too much for'd, the chines and forefoot need filling out a touch and the stem at deck level needs the "rounded-off" effect built in) otherwise it is a nice light hull and gives good performance.

Rgds,

Christian.

Posted By: Adzam
Date Posted: 24 November 2006 at 5:21pm

Hi there Christian , thanks for teh tips there,

it`s not actually a deans kit its a kingston hull with hsl moudlings, i`ve looked at teh deans kit and to be honest wasn`t really that happy with the finnished product.

 

 


Print Page | Close Window